Most cameras are never watched live.
A control room can follow perhaps a dozen feeds at once. The other cameras only record, so most incidents are found the next day by scrolling through footage.
It connects to the recorder you already have.
SurveyLensys reads the camera streams from your recorder over the local network. Nothing is rewired, and the recorder keeps recording as it does today.
You choose what each camera does.
Each camera gets one of four profiles: record only, basic watch, busy area or checkpoint. You pay for the work each camera does, and cameras set to record only cost nothing extra.
Camera profiles
Select a camera to change what it does.
Camera 4 · Store room: Basic watch. Watches for people and vehicles and applies your zone rules. Billed at the Basic watch rate.
You pay for what each camera does.
Illustrative interface
When a rule is broken, the right person gets an alert.
You set the rules that turn a detection into an alert. The alert gives the event, the camera, the zone, the time and the system's confidence. It makes no judgement about the person.
Restricted zone entry · Camera 4 · Store room · 23:42 · 92%
AI capacity moves to the cameras that need it.
As someone walks from one camera's view into the next, SurveyLensys shifts its processing along the route on your floor plan. Entrances keep the capacity you reserved for them.
AI capacity
18 of 24 streams in use
- Reserved for entrances4
- Following activity14
- Free6
Illustrative interface
Your team decides what happens next.
Someone on your team confirms, dismisses or escalates each alert, and the log records who made each decision and when.
Review queue
Pending2Confirmed13Dismissed5#1182Confirmed by Shift lead · 23:44Restricted zone entry · Camera 4 · Store room · 23:42 · 92%
Note: checked on camera, walked over, door left unlatched.
Audit log
- 23:44 · Shift lead confirmed alert #1182 · note added
- 23:43 · Shift lead opened alert #1182
Illustrative interface
Confirmed alerts become incident records.
Each record holds a timeline, your team's notes and an evidence pack. You can still search it after the recorder has overwritten the video.
ClosedIncident #1182
Store room · Ground floor
- 23:42First alertRestricted zone entry · Camera 4 · Store room · 23:42 · 92%
- 23:44ReviewedShift lead confirmed the alert on camera.
- 23:45EscalatedSent to Duty manager on the app.
- 23:51NoteStore room door found unlatched. Latch reported to facilities.
- 00:05ClosedDuty manager closed the incident with a note.
The text record stays searchable after the recorder overwrites the video.
Illustrative interface
Your cameras, finally paying attention.
SurveyLensys adds AI to the CCTV cameras you already have and alerts the person responsible when one of them picks up something your rules cover.
Can I add AI to my existing CCTV?
Yes. SurveyLensys connects to the recorders and cameras you already own, over your local network, and adds detection, alerts and incident records on top. Your recorder keeps recording as before, and a person always reviews what the system flags.
On your premises, or in the cloud?
Most sites run SurveyLensys on hardware of their own. Homes and small sites will be able to use the cloud instead.
On-Premise
- Footage stays inside the building.
- Detection keeps running if the internet drops.
- Hardware sized to your camera count.
Cameras, recorder and SurveyLensys all sit inside your building. Only licence checks and software updates reach us.
More about On-PremiseCloud
Early access- For homes and small sites.
- Short event clips analysed and deleted straight away.
- Only text records are kept.
Your recorder sends short event clips over an encrypted connection. We analyse them, delete them and keep a text record of each event.
More about CloudYour team stays in charge.
Alerts report what was measured.
Each alert gives the event, the camera, the time and the system's confidence. Your team decides what it means.
Every decision is logged.
Confirmations, dismissals, escalations and every look at footage are recorded with who did it and when.
Only people take action.
SurveyLensys reports what a camera saw. Calling security or speaking to someone is always a decision for a person on your team.
Where does your footage live?
| On-Premise | Cloud Early access | |
|---|---|---|
| Live video | Stays on your recorder and hardware, inside the building. | Stays on your recorder. You watch it in your own CCTV app. |
| Event records | Stored on your hardware and kept as long as your settings say. | Text records only, kept by SurveyLensys. |
| Thumbnails | Stored on your hardware. | An optional small thumbnail per event, only if you switch it on. |
| What connects to us | Licence checks and software updates only. We record nothing from your site. | Short event clips, sent encrypted, analysed and deleted straight away. |
Built for sites with a lot of cameras.
That usually means more cameras than there are people to watch them.
Shopping malls
A thousand cameras and a handful of people watching them.
Manufacturing and chemical plants
The cameras are there for insurance, and nobody watches the night shift.
Warehouses and logistics
Goods go missing and it only shows up at stock count.
Hospitals
Patients leave wards at night and staff find out late.
Hotels
A big property, and a small crew on the night shift.
Schools and campuses
Open on many sides, and the guards can't be everywhere.
Corporate offices
After hours the building is mostly empty, and mostly unwatched.
Bank and NBFC branches
Hundreds of branches, and a small risk team to check procedures.
Questions people ask first
Will SurveyLensys work with my cameras?
Most likely. If your recorder or IP cameras support RTSP or ONVIF, which most modern systems do, we can connect. Ordinary 720p cameras work well for people and vehicles. A setup check tells you exactly which features each camera can support.
Does my footage leave the site?
With On-Premise, no. Everything runs on hardware at your site and only licence checks and software updates connect to us. With Cloud, short event clips are sent over an encrypted connection, analysed and deleted straight away, and only a text record of each event is kept.
What happens if the internet drops?
With On-Premise, detection, recording and alerts on your local network carry on. Messages to phones outside the site go out once the connection returns. With Cloud, analysis pauses until you're back online; your recorder keeps recording as normal.
Do you identify people?
Not by default. SurveyLensys detects people and vehicles, not who they are. Face matching is a separately licensed module, offered only to authorised customers with the legal basis to use it.
How is it priced?
Per camera, per year, based on what each camera does. The first year includes setup; renewals cost less. Hardware is quoted separately. We give you an exact quote after a demo on your own cameras.
How long does setup take?
A live demo on a few of your cameras can usually be set up in a single visit. A full rollout depends on your camera count and hardware; after a site survey we give you a timeline with clear milestones.
See it working on your own cameras.
We connect to a few of your existing cameras and show you real alerts from your own site.