Manufacturing and chemical plants
Night-shift safety alerts from the cameras on your plant floor.
Can existing CCTV help with safety and security in a chemical plant?
Yes. SurveyLensys runs on the cameras your plant already has and watches the places that matter when nobody is at the screens: a person down near the tanks, a missing face shield in the reactor hall, one person where two are required at the tanker bay. Each alert goes to your shift supervisor to review, and everything runs on hardware inside the plant.
Sound familiar?
- Our cameras are there for insurance. Nobody watches the night shift.
- We learn about near-misses from the incident book, days later.
- Two-person procedures are on paper. We can't check every one.
Worker down near the tanks on the night shift
One alert on a quiet night shift, from the first sign to the emergency response.
02:31
A lone night-shift worker stops moving near Tank 3.
Person down, no movement 60 s · TK-03 · Tank farm · 02:32 · 89%
02:33
Shift supervisor alerted. No response in 2 minutes, escalated to the duty manager.
02:36
Supervisor on scene; emergency response started. Incident record opened with the camera timeline.
Other moments on a plant floor
Missing face shield in the reactor area
- 10:12
A person enters the reactor area without a face shield.
PPE not detected: face shield · RX-02 · Reactor hall · 10:12 · 84%
- 10:13
EHS officer reviews and calls the area supervisor.
- 10:12
Tanker unloading with one person where two are required
- 15:40
Tanker unloading starts at Bay 2.
1 person in two-person zone, 3 min · TB-02 · Tanker bay 2 · 15:43 · 91%
- 15:44
Supervisor confirms and sends a second operator.
- 15:40
3 am movement in the raw materials store
- 03:04
Movement inside the store, which is locked after 22:00.
After-hours presence · RM-01 · Raw materials store · 03:04 · 93%
- 03:06
Security reviews the clip and walks over. Incident logged.
- 03:04
Which features matter in a plant?
Camera profiles and AI coverage control
Choose which cameras get AI and how much: Record only, Basic watch, Busy area or Checkpoint (reserved coverage for entrances and critical points). You pay for what each camera does.
Person and vehicle detection
Detects people and vehicles reliably on ordinary cameras, including 720p.
Zones, line crossing and after-hours rules
Draw restricted zones and lines on any camera view. Set schedules so a zone only matters after hours. Turn detections into alerts with clear rules.
Unusual activity
Long dwell, falls, after-hours presence, crowd density and unattended items, plus trends over time.
Teach it new things Experimental
Staff mark a few examples of a new object, it learns overnight and is tested before going live. New detections start in experimental mode and are labelled that way.
Alerts on the channels you already use
Dashboard, app, Telegram, email, WhatsApp, SMS or Microsoft Teams on your own accounts, or a webhook to your systems. Escalates if nobody responds. Priorities, grouping and snooze keep noise down; critical alerts are never tuned down automatically.
Human review and audit log
Every alert goes to a person to confirm, dismiss or escalate. Every alert, decision and footage access is logged with who and when.
Incident records and evidence packs
Confirmed alerts become incident records with a timeline, notes and an exportable evidence pack. The text record stays searchable even after the recorder overwrites the video.
Advanced analytics plan On request
A yearly analytics plan instead of a traditional AMC: queue balancing across floors and counters, footfall and dwell heatmaps, space use, occupancy-based energy savings, evacuation headcounts, guard patrol checks, lone-worker checks, parking and vehicle analytics.
In plants: a forklift near-miss heatmap over a month, lone-worker checks and truck dwell at loading bays.
Where does the plant's footage go?
With On-Premise, all footage stays inside the plant on your own hardware, and SurveyLensys never receives it.
Detection and on-site alerts keep working if the site loses its internet connection. Messages to phones outside the site go out once it returns.
Smoke and spill detection are custom detections, labelled experimental, and give an early visual cue alongside your certified gas and smoke detectors, never instead of them.
How does setup work?
- 01
A live demo on your cameras
We connect to a few of your existing cameras, usually in a single visit, and show you real alerts from your own site. Nothing on your system changes.
- 02
Site survey and compute plan
We look at your camera count, the features you want and where they matter, then tell you the computing hardware needed at minimum and at full coverage.
- 03
Staged rollout
Start with the cameras that matter most, then extend area by area, with a clear milestone at each stage. Most plants start with the tank farm, the reactor hall entrance and the tanker bays, then extend to the rest of the site.
Questions from plant teams
Can it detect PPE like helmets and face shields?
Yes, in areas where the cameras have a clear view, such as a reactor hall entrance. An alert reads 'PPE not detected', with the item, the camera, the time and how confident the system is, and goes to your EHS officer or supervisor to review. It records what the camera saw at that moment and makes no judgement about the worker.
Does it replace our gas and smoke detectors?
No. Smoke and spill detection are custom detections, added through Teach it new things and labelled experimental. They give an early visual cue that a person can check, alongside your certified gas and smoke detectors, never instead of them.
Will it work in low light?
SurveyLensys works with whatever your cameras can see. Many cameras switch to infrared at night, and people and vehicles generally show up well on those images. Areas that stay very dark, or that face bright lights, give less reliable results, and the setup check points those cameras out before you rely on them.
See it working on your own cameras.
We connect to a few of your existing cameras and show you real alerts from your own site.