العربيةBook a demo

How SurveyLensys works

How does SurveyLensys work with existing CCTV?

SurveyLensys connects to your existing recorder or IP cameras over the local network, runs detection on the cameras you choose, and turns what it sees into factual alerts for a person to review. Confirmed alerts become incident records. Nothing about your cameras or recording changes.

Six steps, from your recorder to an incident record

All six steps take place in the same building during one night.

  1. Step 1

    Connect

    We link to your recorder using two standard protocols, RTSP and ONVIF. Your recorder carries on recording as before.

    What RTSP and ONVIF mean

    RTSP is the standard way a recorder streams video to another device on the network.

    ONVIF is the standard that lets us find your cameras and read their settings automatically.

    RTSP and ONVIF, explained
  2. Step 2

    Check

    A setup check shows which features each camera can support. It flags any camera whose angle or resolution falls short, so you can decide whether to adjust it.

    Setup check

    • Camera 1 · Entrance1080p · facing the doorAll features
    • Camera 4 · Store room720p · good anglePeople and zones
    • Camera 11 · Car park720p · wide viewPeople and vehicles
    • Camera 15 · StairwellFaces a bright windowCheck angle

    Illustrative interface

  3. Step 3

    Choose

    Give each camera a profile and draw the zones and lines that matter: a store room after hours, a gate, a loading dock.

    Camera profiles

    Select a camera to change what it does.

    Camera 4 · Store room: Basic watch. Watches for people and vehicles and applies your zone rules. Billed at the Basic watch rate.

    You pay for what each camera does.

    Illustrative interface

  4. Step 4

    Alert

    Rules turn detections into factual alerts on the channels you choose. If nobody responds, the alert escalates.

    Restricted zone entry · Camera 4 · Store room · 23:42 · 92%

    Where alerts go

    SurveyLensys

    Restricted zone entry · Camera 4 · Store room · 23:42 · 92%

    Open in dashboard

    No response in 2 min · escalated to Duty manager

    Illustrative interface

  5. Step 5

    Review

    A person confirms, dismisses or escalates every alert. Every decision, and every look at footage, is logged with who and when.

    Review queue

    Pending
    2
    Confirmed
    13
    Dismissed
    5
    #1182Confirmed by Shift lead · 23:44

    Restricted zone entry · Camera 4 · Store room · 23:42 · 92%

    Note: checked on camera, walked over, door left unlatched.

    Audit log

    1. 23:44 · Shift lead confirmed alert #1182 · note added
    2. 23:43 · Shift lead opened alert #1182

    Illustrative interface

  6. Step 6

    Record

    Confirmed alerts become incident records with a timeline, notes and an evidence pack you can export.

    Incident #1182

    Store room · Ground floor

    Closed
    1. 23:42First alertRestricted zone entry · Camera 4 · Store room · 23:42 · 92%
    2. 23:44ReviewedShift lead confirmed the alert on camera.
    3. 23:45EscalatedSent to Duty manager on the app.
    4. 23:51NoteStore room door found unlatched. Latch reported to facilities.
    5. 00:05ClosedDuty manager closed the incident with a note.

    The text record stays searchable after the recorder overwrites the video.

    Illustrative interface

See it working on your own cameras.

We connect to a few of your existing cameras and show you real alerts from your own site.