العربيةBook a demo

Feature

Person and vehicle detection

Can AI detect people and vehicles on ordinary 720p CCTV cameras?

Yes. SurveyLensys detects people and vehicles reliably on ordinary cameras, including 720p. It records that a person or vehicle is present and where, without identifying anyone, and those detections feed the zone, tracking and alert rules you set.

How it works

  1. 01

    The cameras you choose are watched

    Cameras on an AI profile are checked continuously for people and vehicles.

  2. 02

    Each detection is framed

    A detection marks where the person or vehicle is in the view, with a confidence value.

  3. 03

    Your rules decide what matters

    A detection on its own is not an alert. Zones, lines and schedules turn the right ones into alerts.

    New alert

    Restricted zone entry

    Restricted zone entry · Camera 4 · Store room · 23:42 · 92%

    Illustrative interface

Where it helps

  • The yard at night

    People and trucks in the yard, picked up on the dock cameras already in place.

    Vehicle dwell over 2 h · YD-07 · Yard bay 7 · 16:10 · 95%

    Warehouses and logistics
  • Porch and car park

    A car left in the drop-off lane, flagged so the valet team can move it.

    Vehicle dwell over 20 min · PK-02 · Porch drop-off · 19:40 · 96%

    Hotels
  • The campus perimeter

    A person crossing the perimeter line by the sports ground after hours.

    Line crossed after hours · PR-06 · East perimeter · 22:47 · 90%

    Schools and campuses

What you control

Which cameras detect
Set through each camera's profile. Record only cameras run no detection.
What counts on each camera
People, vehicles or both, for each rule you set.
What happens next
Zones, lines, schedules and alert routing decide which detections reach a person.

Good to know

  • Results depend on camera angle, lighting and distance. 720p is enough for people and vehicles at normal distances, and the setup check shows what each view supports.
  • Detection reports that a person or vehicle is present. It does not identify anyone.
  • A detection is a measurement with a confidence value. It says nothing about why anyone is there.
  • Glare, heavy rain or a blocked lens lower accuracy, and the system can be wrong, so a person reviews every alert.

Questions about this feature

Does it work at night?

It works with whatever picture your cameras produce at night. If the night view is too dark or blurred for a person to make out people and vehicles, detection struggles too. The setup check shows each camera's night view.

Does it recognise who people are?

No. Person detection records that someone is present and where, and each alert describes an event. Neither names anyone.

What resolution do my cameras need?

Ordinary 720p cameras work well for people and vehicles. Higher resolution helps at long distances and with small objects.

See it working on your own cameras.

We connect to a few of your existing cameras and show you real alerts from your own site.